Capitol Marine Gears

Important CAUTION notes for Capitol Marine Gear Owners and Operators

DO NOT OPERATE CONTINUOUSLY IN REVERSE MODE FOR MORE THAN 30 MINUTES AT 75% OF AVAILABLE HORSEPOWER.

DO NOT OPERATE UNIT OVER 180º F (82ºC)

DO NOT OPERATE UNIT WITH HIGH (above 230 psi) OR LOW (below 180 psi) OIL PRESSURE

DO NOT ‘WINDMILL’ UNIT IN EVENT OF ENGINE FAILURE (PROP SHAFT SHOULD BE LOCKED TO PREVENT ‘WIND MILLING’).

DO NOT ATTEMPT FINAL ALIGNMENT OF OUTPUT FLANGE AND PROP SHAFT COUPLING WHEN VESSEL IS IN DRY-DOCK.

DO NOT SHIFT TRANSMISSION UNLESS ENGINE IS AT IDLE SPEED.

DO NOT USE TRANSMISSION TO SUPPORT REAR OF ENGINE.